Yard force YF1800LR Manual De Referencia página 16

CAUTION
Working with detergent ensures a quick soaking of the dirt, and allows the
high- pressure water to penetrate and remove the dirt more effectively. Always
spray detergent on a dry surface, do not pre-soak area. Wetting the surface
first dilutes the detergent and reduces its cleaning ability.
To apply detergents you must be operating at low pressure. This provides
a gentle application of detergent, with the pressure equivalent to the lowest
garden hose. The high-pressure setting is used for cleaning, you cannot
apply detergents when working at high pressure.
Always test detergent in an inconspicuous area before use.
NO BLEACH
1. Engage gun safety lock.
Fig. 17
2. Attach the low-pressure spray tip (black) for soap or detergent application.
Detergent application will only work with low pressure spray tip.
Fig. 19
3. As shown Fig.19 Lift up to remove the cap of detergent tank, fill tank with
detergent or soap and replace the cap. Apply detergent as instructed by the
detergent manufacturer.
4. Turn on the pressure washer. Depress trigger to operate unit. The liquid detergent
will automatically mix with water, and be discharged through the nozzle. Apply
detergent to a DRY work surface, from bottom to top.
5. Allow detergent to remain on the surface for a short time before rinsing. Do not
allow detergent to dry on surface.
Fig. 18
Fig. 20
15