Bimar VT312 Manual De Instrucciones página 11

 Do not allow children, or irresponsible persons, to use the device
without supervision.
 Check that the fan does not come into contact with water
or other liquids. If it is accidentally wet or immersed in a
liquid, first disconnect the power supply by turning off the
control panel switch, and only then remove the plug from
the power socket. Dry both the plug and the power socket
carefully before reactivating the power socket. Reconnect
the plug to the power socket and then use the appliance. If
in doubt, call in qualified staff.
 If the electric cord is damaged, it has to be replaced by the
supplier or an authorized service center or a professionally
qualified, to avoid any risks.
 Do not use the appliance with a timer or a programmer or
with a system that can switch on the appliance
automatically, to avoid risk of fire, since a fire risk exists if the
applaince is covered or positioned incorrectly.
 Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
 After removing the packing materials, check the integrity of the heater; if you are
unsure, do not use it and ask for qualified professional help. The packing materials
(plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children
because they are potential sources of danger. Attention: any stickers or advertising
material applied to the grid removed before using the appliance. The manufacturer
declines all responsibility in case this is not safe working practices will be respected.
 Before connecting the appliance, check that the voltage values shown on the data
plate correspond to those of the electricity supply network. In the event of
incompatibility between the electric outlet and the plug of the appliance, have the
outlet replaced with another more suitable type by professionally qualified
11/36