Publicidad
Idiomas disponibles
Idiomas disponibles
the hazards involved.
• Children shall not play with the appliance.
Cleaning and user maintenance is not to be
performed by children unless they are older
than 8 and supervised.
• Before servicing the unit, unplug the power
cord.
• Before connecting the device, make sure that
the location is suitable. Pay attention to, for
example, cabinet height.
• If the supply of the water connection proves
to be unsuitable, contact a plumber.
• Never forcefully plug the plug into the socket.
• Do not use extension- or multi-sockets with
insufficient current capacity.
• Do not use if the power cable or plug is
damaged.
• To disconnect the plug safely, grasp the plug
and gently remove it from the socket. Never
pull on the cable.
• Make sure that children cannot access the
power cable while it is in use.
• Do not pull or carry by means of the cable,
do not use the cable as a handle, do not close
doors or windows over the cable or wrap the
cable around sharp corners or edges. Keep
the cable away from heated surfaces.
• Do not touch the plug with wet hands or
operate without shoes.
• Only use accessories recommended by the
manufacturer in combination with the device.
Use of accessories not supplied or sold by
the manufacturer may result in fire, electric
shock or injury.
• Do not use the device if it - or one of its
accessories - is damaged.
• If the device does not operate properly, or
has been dropped or damaged in any way, it
M27794_Aquadon_Compact_Manual_20211213_BS.indd 7
M27794_Aquadon_Compact_Manual_20211213_BS.indd 7
must be returned to the manufacturer or an
authorized service centre as a precautionary
measure.
• Do not use the appliance if you observe water
leakage from unusual places.
• Only use the device for its intended purpose.
Installation requirements:
a. Before installation, it must be checked whether the
technical requirements according to the given technical
data are met at the location.
b. Make sure that the device is safely earthed with a safety
socket.
Installation of the outlet pipe (ill. 1)
a. Press the spout or hose (A) to the collar (C) on the round
hole at the top of the main unit (2).
b. Screw the cover (B) to the main unit (2)
NOTE: Take care not to damage the rubber seals (D) during
installation.
INSTALLATION OF THE CONTINUOUS FLOW HEATER ON
THE SINK (ill. 2).
ATTENTION: Your Aquadon is only intended for connecting the
cold water pipe. Please do not connect the hose to an existing
hot water pipe. If you have both a cold water and a hot water
connection on your wall, only the cold water connection may
be used!
1.
With power connection above the sink (ill. 3)
a. Place the spacer ring with the crown facing upwards into
the lower part of the main unit (2). Make sure that the
cable is placed in the recess provided.
b. Place the rubber sealing ring (3) underneath the spacer
ring. Thread the thread of the continuous flow heater
into the hole of the rubber sealing ring (3).
c. Insert the thread of the continuous flow heater through
the opening provided on the sink or worktop (4). If you
are unable to fit the plug into the hole, please contact a
specialist.
d. Insert the cable guide ring (5) from below onto the
thread of the main unit (2), and screw the fixing nut (6)
to fix it in place.
e. Screw the flexible hose to the thread of the continuous
flow heater and to the water outlet on the wall.
f. Open the water supply, set the continuous flow heater
lever to water flow, and turn the spout/hose left and
right. Make sure the connection is tight, and fix any leaks
before use.
g. Connect the water heater plug to the power supply.
2.
With power connection below the sink (ill. 4). Important!
Please ensure that the opening in the worktop or sink is
large enough for the plug. If you are unable to fit the plug
into the hole, please contact a specialist.
7
14.12.21 13:15
14.12.21 13:15
Publicidad
