Unit); Playback - Teac A-H01 Manual Del Usuario

Playback

Press the POWER button to turn the unit ON.
1
If a power amplifier is connected, turn on the power
<
amplifier last .
2 Press the SOURCE button repeatedly to select a
source.
Each time the SOURCE button is pressed, the source
changes as follows:
USB (USB input for computers)
COAXIAL (Coaxial digital input)
OPTICAL (Optical digital input)
LINE 1 (Analog input)
LINE 2 (Analog input)
The input indicator of the selected source lights up .
The input indicator blinks when the input signal is not
<
digital audio data or the format of the audio signal is
not compatible with this unit, such as Dolby Digital,
dts, or AAC . If this happens, set the digital OUT setting
of the connected device to PCM audio output .
To select "USB" to play back music files stored on a
<
computer, install dedicated TEAC driver software on
the computer before connecting the unit . (page 12)
3 Start playback on the connected source device.
See the connected device's manual for detailed
information about using the device .
Adjust the volume.
4
Turn the volume knob (VOLUME) or use the VOLUME
buttons on the remote control unit to adjust the
volume to the appropriate level .
11