Eschenbach magno DIGITAL Manual De Instrucciones página 26

Temporarily freezing images:
To freeze an image, press the photo button (w) briefly. The frozen image will be shown on the display. You can further
edit it by using the magnification button (e) and the contrast button (t).
If you press the photo button (w) again briefly, you will return to live image mode.
Saving images permanently:
Once you have frozen an image, you can save it permanently by pressing and holding the photo button (w,
for at least 3 seconds. The image will be saved at position 1 in the magno DIGITAL memory. The memory location is
displayed using a diskette symbol at the top screen border. Images already saved are moved up by one position. Up to
20 images can be permanently saved. Once the maximum memory capacity has been reached, a red diskette symbol
is displayed at the top screen border. In this case, you should delete some saved images in order to create more
memory capacity (see managing saved images).
If you switch the magno DIGITAL on and there is no memory capacity available for images, this will be shown on the
start screen top border by a red, crossed-out diskette symbol.
Image has been saved in Position 1 of 20 (example).
Image memory is full (symbol is then shown red). Images must be deleted before you can save new images.
Display when the magno DIGITAL is switched on and the image memory is full. No more images can be saved.
- 26 -
)