Comfort Glow QTH6000 Manual Del Propietário página 7

Operating Instructions
1. Start and select working mode
OR
OR
2. Setting Desired Temperature
OR
OR
OR
OR
Turn the heater on by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied remote control.
Turn the heater off by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied remote control.
Note: Powering off the heater will stop the heating process only. The
fan will continue to blow for approximately 3 more minutes to allow
for the interior components to cool. The fan will then turn off
automatically.
Select a heat Mode.
Press the MODE button to toggle between the three heat settings.
High Mode uses 1500W. Low Mode uses 1000W. ECO mode is an
Economic Energy Saving Function. When ECO mode is chosen, the
heater will set the temperature automatically to 68°F(20°C) under this
mode
Adjust the desired temperature by pressing the Up/Down arrows on the
control panel or remote control.
Desired temperature options vary from 59°F to 86°F, or from 15°C to 30°C.
Once you have chosen the desired temperature, the heater will remain on
until the room temperature increases to that temperature on the digital
display. The heater will cycle on and off to maintain that desired room
temperature.
Press °C/°F button to change the display temperature between Fahrenheit
and Celsius.
The Fahrenheit indicator LED will light, when the temperature is displayed in
Fahrenheit.
The Celsius LED will light, when the temperature is displayed in Celsius.
7