Publicidad
Idiomas disponibles
Idiomas disponibles
TETRA HYBRID HD CCTV CAMERA,
DOME TYPE
User Manual
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference. Due to updates can exist differences. Consult our website
www.steren.com to obtain the current version of this manual.
Case
Analogical or digital
selector / Menu
CONNECTION
MONITOR
DVR
ANALOGUE / DIGITAL SELECTION MODE
This camera has the tetrahybrid technology, and it's possible to connect any analogue or digital
DVR.
CVI
Remove the cover from the joystick.
CVBS
TVI
AHD
Press and hold the joystick for 5 seconds, in the
AHD
direction that shown in the image, to choose the signal
CVI
according with the DVR used.
MENU SETTINGS DESCRIPTION
[AE] Brightness, exposure and gain
[WB] White balance
[DAY-NIGHT] Mode
[VIDEO SETTING] Contrast, sharpness, color gain, DNR, video format and dwdr
[LANGUAGE] English, Chinese, Spanish, Russian and Italian
[RESET] Factory restart
[SAVE-EXIT] Save the changes and exit
[EXIT]
PARTS
Lens
Sensor
Mounting base
Video connector
Input
connector
V1.0 / 1017v
• Don't use or store the device in places where exist water or splashes.
• This product is NOT a toy; keep it away from children.
• This device cannot be used by people with different abilities, unless they have preparation
and supervision.
• Don't install near of the heaters or electromagnetic noises.
(electric engines, electrified fences, outlet switches, etc.).
• Do not install it in outdoor.
• Do not install the cables inside of pipes where there electric wires, this may cause that the
image will be diffuse.
• Use CAT5E UTP cable not longer than 100 m.
• If you use a coaxial cable, the length do not must exceed 50 m.
• Connect the camera to battery backup, to protect it of the electric overload and still working.
1. Select the place where you want install the camera. It's recommendable that will be
over a solid surface (wall, ceiling, under outgoing).
2. Turn the mounting base (as shown in the
image) remove it.
3. Use the base to make the drill marks.
4. Drill and insert the anchors and screws.
5. Pass the connection cable through camera base.
Screw firmly.
6. Assembly the camera again.
JOYSTICK USING
SETTINGS MENU
MAIN MENU
AE
WB
DAY-NIGHT
VIDEO SETTING
LANGUAGE
RESET
SAVE-EXIT
EXIT
Input: 12 V - - - 1 000 mA
Minimum light: 0.01 lux/F 1.2
Format: AHD 1 920 x 1 080
Image sensor: color CMOS
Video output: BNC
Resolution: 2.0 MP
Operating temperature: -10 to 50 °C
Specifications may change without notice
CAUTIONS
INSTALLATION
7. Move manually the camera to adjust the vision
angle.
Press the joystick once to enter in
this menu. Use the joystick to move
and edit options.
ENGLISH
SPECIFICATIONS
Publicidad
