brondell O2+ BALANCE P400 Serie Manual Del Usuario página 10

3 PREPARING THE PRODUCT FOR FIRST USE (cont.)
5. Place the Mesh Pre-Filter in the
appliance.
NOTE: Make sure that the side with
the two middle tabs are
pointing towards you. Slide
all of the side tabs into their
corresponding slots in the
frame of the unit.
3.2 INSTALL THE REMOTE CONTROL BATTERY
Take out the
1.
battery frame.
7
Remove the
2.
battery from the
packaging.
6. To reattach the Front Panel, insert
the bottom hooks into the bottom
of the appliance first. Then push
the panel against the body of the
appliance until the magnets catch.
Put the battery
3. 4.
inside the battery
frame with the
"+" pointing up.
Slide the battery
frame back into
the bottom of the
remote control.