Publicidad
Idiomas disponibles
Idiomas disponibles
4 OPERATING YOUR O2+ BALANCE AIR PURIFIER (cont.)
4.3 ADJUSTING THE AIR QUALITY SENSOR SENSITIVITY
The sensitivity of the Air Quality Sensor can be adjusted. To adjust the sensitivity of the O2+
Balance:
1.
On the remote control, press and hold the "Filter" button until the Filter Indicator light on
the control panel stays red and one of the lights above starts to flash.
2.
Press the Filter button on the remote consecutively to select the desired Sensitivity Setting
Air Quality Sensor Sensitivity
3.
Once the desired setting is chosen, do not press any buttons and the setting will
automatically set in about 10 seconds (the Filter light will stop flashing when set)
4.
Turn off the Balance and turn back on to activate the newly set Air Quality Sensor Sensitivity
Low
Medium
High
10
Publicidad
