Registering A Still Image To Be Used As A Logo - Sony DSR-PD150 Manual De Instrucciones

Registering a still image to be used as a
logo
Select a still image from a "Memory Stick."
Selecting a still image
Before operating
Insert the "Memory Stick" on which the desired still image is recorded, into your camcorder.
(1) DSR-PD150/PD150P/PD170/PD170P: While holding down MEMORY MIX, set
the POWER switch from OFF (CHG) to CAMERA. Keep pressing MEMORY
MIX for about five seconds.
DSR-250/250P: Set the MEMORY/CAMERA/VTR selector to MEMORY and
while holding down MEMORY MIX, set the POWER switch to ON. Keep
pressing MEMORY MIX for about five seconds.
(2) DSR-PD150/PD150P/PD170/PD170P: Press MENU to display the menu.
DSR-250/250P: Push the CUSTOM PRESET/MENU switch in the MENU
direction and release it to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
(4) Turn the SEL/PUSH EXEC dial to select LOGO INS, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select ENTRY, then press the dial.
(6) Enter your password. Turn the SEL/PUSH EXEC dial to select EXECUTE, then
press the dial.
(7) Turn the SEL/PUSH EXEC dial to select LOGO SET, then press the dial.
6
, then press the dial.