Sony DSR-PD150 Manual De Instrucciones página 9

Registering a still image to be used as a logo
To cancel registering the logo
Select CANCEL in step 10, then press the SEL/PUSH EXEC dial.
Once you register the logo
INSERT is automatically set to ON in the menu settings, and the logo will be inserted.
Notes
•Do not remove the battery pack, the AC Adaptor, or the "Memory Stick" while
registering the logo data. Otherwise, the "Memory Stick" or image data in it may be
damaged, and moreover, this will cause serious damage of the camcorder.
•The setting of the auto logo insert function will be kept until you set LOGO INS to
OFF in the menu settings.
•When INSERT is set to ON, you cannot do any recording if the "Memory Stick" in
which the registered logo is recorded is not inserted, and the following mode and
functions will not be active:
– Progressive mode (DSR-PD150/PD150P/250/250P)
– Progressive recording mode (DSR-PD170/PD170P)
– Memory mix
– All the functions in memory mode
– All the functions that are used with the "Memory Stick" in VCR mode (DSR-PD150/
PD150P/PD170/PD170P) or in VTR mode (DSR-250/250P)
•Even though you set the POWER switch to MEMORY, the camcorder works in
CAMERA mode (DSR-PD150/PD150P/PD170/PD170P).
•Even though you set the MEMORY/CAMERA/VTR selector to MEMORY, the
camcorder works in CAMERA mode (DSR-250/250P).
If you enter an incorrect password
"INCORRECT PASSWORD" will be displayed.
When the selected image cannot be displayed
"FILE OPEN ERROR" will be displayed.
Depending on the background color of the image
Choose "CHROMA" when the background color is blue, or "LUMINANCE" when the
background color is white.
9