Publicidad
Idiomas disponibles
Idiomas disponibles
Fit the foot rails cont...
D
(
)
Push the Foot Rails as far back to the rear of the vehicle as possible. Secure the Foot Rails to the vehicle
using the M6 x 35 Hex Bolts, M6 Spring Washers and M6 x19 x 1 Flat Washers (Items 6, 7, 8). Place some
Silicone onto the thread of each Hex Bolt before fastening. Once fastened, place a M6 Nut Cap (Item 5)
over the head of each bolt.
FIT THE RACK
3
Note: If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal
Assembly Instruction (Document RRSTUNI). Read Step 3A before fitting the Wind Deflector
A
(
)
Before fitting the Wind Deflector, and with
the Rack in the upside down position,
(Check with product sticker. It should be
upside down), slide a M8 x 20 Hex Bolt (Item
1) into each end of the First Slat using the
machined slot as shown.
REV_A01
4
Publicidad
