2
FIT AND SECURE
2.1
1
2.2
2.3
=
LASS028_REV_A02
1
5
4
3
1
Slide two M6 Stud Plates (Item 1) into each
side profile.
(Two are needed per side to fit Load Bars or
a Rack).
10MM
Depending on your side profile you
might need the 14mm Stub Plate (Item
14). Twist each stud plate to separate
them. Use two stud plate per Leg Mount.
Loosely fit a Leg Mount (Item 3) to each of
the Stud Plates using M6 x 19 x 1SS Flat
Washers and M6 Nyloc Nuts (Items 4 & 5).
10MM
Looking from the side of the vehicle, position
the Leg Mounts (Item 3) to center the
Slimline II Rack or place Load Bars where
desired over the load bed.
10MM
=
3
© 2020 FRONT RUNNER VEHICLE OUTFITTERS