Ultenic D5s Pro Guia Del Usuario página 5

Add your Wi-Fi network
Choose a network to connect with your sweeper
(this app is support only on 2.4GHz Wi-Fi channels)
PDCN
Distribution network instructions
1.Please make sure that the WIFI password is entered correctly.
2.Please confirm whether the WIFI is 2.4G； If the home router is a du
al-band router,please set the SSID name of 2.4G and 5G separately.
3.Please check if the router has MAC address fitering set,or if the number
of assigned IP address is full.
4.Try to avoid network rush hours (18:00 to 23:00) for the first time
binding.
5.Please contact customer service if it is still not bound
successfully,email:support@ultenic.com
NEXT STEP
Add via bluetooth
Step �: Turn on Bluetooth on your phone and scan for nearby Bluetooth devices.
Step �: Select the model of your robot.
Step �: Enter your home�s Wi-Fi password and complete the connection.
Add manually
Add via Bluetooth
Enable device searching permissions
Allow Bluetooth use
Enable Bluetooth
Enable Bluetooth
Please swipe up from the bottom of the screen or
slide down from the top to turn on Bluetooth.
I know
Try to connect with device
Current WiFi
1.Go to the phone Setting-WLAN
2.Connect to WiFi Ultenic-XXXX
3.Return to Ultenic after successful connection
GO AND CONNECT
Add manually
Scanning for nearby Bluetooth devices...
Add the device manually when it cannot be scanned.
might the device fail to be scanned? >
On
Off
D�s Pro
PDCN
Add via Bluetooth
Cancel
Why
Trying to connect with the device
Routers,phones,and devices should be
put as close together as possble
Searching for the device
Device already registered to
cloud
Device initialization
COMPELETED
Enter your home's Wi-Fi password
Only supports �.�G Wi-Fi network
PRO
Please enter Wi-Fi password
Complete