Ultenic D5s Pro Guia Del Usuario página 8

Then you can say the following voice commands to your mobile device, and the robot
will respond accordingly.
"OK Google, turn on the robot (or your robot's name if you changed the device name)."
"OK Google, turn off the robot."
"OK Google, robot go home."
Note:
If you have a Google Home Speaker at hand, please follow the steps below to
make it available for voice commands.
a. Plug your Google Home Speaker into the socket.
b. Tap + on the upper left corner of the main page, then select Set up device.
c. Tap Set up new devices, then tap Next to look for devices.
d. Follow the instructions of Google Home APP to connect your Google Home
Speaker to WiFi.
Then you can speak the voice commands mentioned above, and the robot will
respond accordingly as well.
Troubleshooting Guide
Q�. Why cannot the robot connect to WiFi?
Make sure you've entered the right password.
Keep the robot, mobile device and your router being as close as possible.
Make sure you selected a �.�GHz WiFi, the �GHz band is not supported.
Q�. Why does the robot show that it's offline?
Make sure you have switched on the robot and check the network connection of
your mobile device.
Q�. Why cannot I control the robot with Alexa?
Please check the network connection of your mobile device.
Make sure you've connected the robot to Ultenic APP.
Make sure you've enabled "Ultenic Home" Skill in Alexa APP.
Make sure your robot has been discovered in Alexa APP.
Make sure you are using correct Alexa voice-commands.