Ultenic D5s Pro Guia Del Usuario página 7

Note:
If you have an Echo device at hand, please follow the steps below to make it
available for voice commands.
a. Log in to your Echo device with the same Amazon account for logging into
Alexa APP.
b. Tap Devices on the bottom, then tap Echo & Alexa to show your Echo device.
Then you can speak the voice commands mentioned above, and the robot
will respond accordingly as well.
Control the Robot with Google Assistant
IMPORTANT TIPS：
a. Make sure the robot has enough power and the Power Switch of the robot is
pressed to ON.
b. You have connected the robot to Ultenic APP.
c. Make sure you've installed Google Home APP on your mobile device.
d. Make sure the WiFi connection is stable.
Step �:
Launch Google Home APP, then follow the in-app instructions to set up your Google
account.
Step �:
Tap Settings on the main page, then scroll down to the bottom to tap Works with
Google.
Step �:
Tap " " on the upper right corner, then search and select Ultenic Home.
Step �:
Enter the email address and password for logging in to Ultenic APP.
Step �:
Tap Link Now and Authorize, it will show you Ultenic Home is linked.
Step �:
Follow the instructions to set up the device to finish the settings.
Step �:
Tap " " and allow Google Home to access the microphone on your mobile device.