P
x 12
3) Glue two Dowels (P) in each end of the Front Apron (G) and the Side Aprons (H). Lay the aprons
on the bottom of the Seat (J) in their approximate positions. See FIGURE 3.
Note: The Front Apron (G) is square on both ends. The Side Aprons (H) are square on the front end
and angled on the back end to fi t against the back legs.
Q
x 2
FIG. 4
4) Glue the Front Stretcher (K) into the round hole in the side of the Right Front Leg (M). Glue the Front
Apron (G) into the two dowel holes in the same side of the leg. Now glue the front stretcher and front
apron to the Left Front Leg (L). See FIGURE 4. Insert a #8 x 1¾" Pan Head Screw (Q) through each
front leg into the front apron and fasten securely.
5) Glue the Side Aprons (H) to the back leg assembly. The square end of the
aprons must be toward the front and the angled end must match the angle
on the Back Leg (E).
Glue the Side Stretchers (N) into the back leg assembly.
6) Glue the front leg assembly onto the Side Aprons (H) and Side Stretchers (N).
See FIGURE 5.
P
P
H
FIG. 3
P
Q
dowel holes
FIG. 5
G
J
L
K
G
L
P
P
Square end
H
Angled end
P
M
side stretcher
hole
Q
N
E
H
82W — PAGE 5