Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Mounting the fixture
Place the back plate of the fixture body (B)
onto the fixture mounting screws (FF) and
secure it into place by using the lock nuts
(AA) provided.
Caulk the upper 2/3
the fixture body (B).
Leave the bottom 1/3
drainage of any water that may leak into
the enclosure.
4
Assembling the lantern
NOTE: Do not exceed a 100 watt incandescent
light bulb or a 26 watt SBCFL. For more
information on the proper lighting to use, see
www.homedepot.com/lightingfacts.
Install up to a 100 watt incandescent light
bulb or equivalent listed SBCFL (self-
ballasted compact fluorescent lamp) in the
socket of the fixture body (B).
Use the hood screws (CC) to secure the
hood (A) to the fixture body (B).
rds
of the back plate on
rd
un-caulked for
AA
FF
6
B
A
B
CC
Publicidad
