Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: If you do not press any button for 60 seconds while you are in the
setup menu, the thermostat automatically saves any changes made and exits
the menu.
Description
Function
Press the s or t button to
5
select your heating system and
optimize its operation
14
select Fahrenheit or Celsius
temperature display
select Compressor Protection settings 1 On
15*
* Compressor Protection: This feature forces the compressor to wait approximately 5 minutes
before restarting, to prevent equipment damage. During the wait time, the message "Cool On" or
"Heat On" is displayed on screen.
About your new thermostat
Your new Resideo thermostat has been designed to give you many years of
reliable service and easy-to-use, push-button climate control.
Displays ambient (measured) temperature at all times
•
One-touch access to setpoint temperature
•
Built-in compressor protection
•
Setting
5 Gas or oil furnace: Use this setting if you have a standard gas or
oil furnace that is less than 90% efficient.
6 Electric furnace: Use this setting if you have any type of electric
heating system.
3 Heat pump, hot water or high-efficiency furnace:
Use this setting if you have a hot water system or a gas furnace of
greater than 90% efficiency.
2 Gas/oil steam or gravity system: Use this setting if you
have a steam or gravity heat system.
0 Fahrenheit temperature display (°F)
1 Celsius temperature display (°C)
0 Off
9
Publicidad
