PRECAUTIONS ...........................................................1
Notice..........................................................................2
Information................................................................2
Supplied accessories................................................3
Supplied accessories
Check that the following items are included.
The speaker and the grille are packed separately. Be careful
not to lose them.
• Speaker cable 2 m (6.6 ft) x 2
• Grille x 2
• Non-skid pads 8 pcs. x 1
Non-skid pads
3
En
Contents
Non-skid pads
When placing the speakers
on a flat surface, affix the
included non-skid pads to the
corners of the speaker
undersides, as shown. The
pads will prevent the speaker
from moving around.
Placing the speakers
Attaching the grille.................................................. 3
Placing the speakers................................................ 3
Connecting to your amplifier................................. 4
Specifications............................................................ 5
Attaching the grille
The speaker and the grille are
packed separately.
To attach the grille, line up the
holes on the grille with the pegs
on the speaker, and gently push
the grille onto the speaker.
NOTE
• When removing or attaching the grille, be careful not to
touch the drive units, and not to exert excessive force
with any tools.
• Do not touch or apply impact to the speaker's
diaphragm. Otherwise, the speaker may malfunction.
• To avoid damaging the grille, never apply excessive
force, and be sure to use its frame, never pull or push the
surface, for removing or attaching the grille.
Better stereo images will be obtained when the speakers
are slightly angled in towards the listening position.
NOTE
• Place the speakers on a sturdy, vibration-free surface.
• Placing this unit too close to a CRT TV set might
happen impair picture color or create a buzzing noise.
Should this happen, move the speaker away from the TV
set.