PURE ELECTRIC Pure Air Go Manual Del Usuario página 15

5. The e-scooter is designed for outdoor use on smooth, flat,
stable surfaces. Your riding speed should be adjusted
to given conditions (e.g. light, weather, other traffic
participants, etc.)
6. Both tyres must be in contact with the ground at all times
in order to grip the ground for you to stay upright. Avoid
obstacles and slippery surfaces (such as snow, ice, oil, sand,
etc) which could result in a loss of balance or traction and
cause a fall. Be careful when riding and avoid abrupt or
acrobatic manoeuvres, jumps, curbs, loose materials, tram
tracks, potholes and other obstacles (especially those
higher than 1 cm). If you must cross an obstacle, adapt your
trajectory and speed to that of a pedestrian, and get off
the scooter if the obstacle becomes dangerous.
7. If your e-scooter breaks or shows wear, we strongly
recommend having a service carried out.
Although this e-scooter is IP65 rated (see section 3.6), you
should exercise caution when riding in wet or snowy conditions
and dry the e-scooter after use. Do not use the e-scooter in
temperatures below -5°C. This can have a negative effect on
the performance and life of the battery and the motor. There
is also an increased risk of slipping at these temperatures
due to ice formation. Always keep the e-scooter away from
high humidity, during use as well as in storage. Never turn off
the e-scooter while you are riding. Please do not charge the
battery when unattended. Disconnect the battery from the
power source when it is fully charged.
Avoid overcrowded or high-traffic areas and respect the local
regulation and code of the road. Notify your presence if
approaching someone who has not seen or heard you. Cross the
protected passages while walking. Do not divert the use of the
vehicle.
Take extra caution when using in the dark.
Never turn off the e-scooter while you are riding.
Please do not charge the battery when unattended.
Disconnect the battery from the power source when it is fully
charged.
15