PURE ELECTRIC Pure Air Go Manual Del Usuario página 17

3.2 Assembly
1
2
3
4
5
Take out the folded e-scooter from the
box. Use both hands and lift from the
base of the e-scooter. Do not attempt
to lift the e-scooter using the stem.
Unfold the kickstand (14) on the
side of the footrest (9) and place the
e-scooter on the floor.
Raise the stem (7) slowly until it is in
line with the front fork (15).
Align the metal U clamp (8)with the
holes and turn the handle clockwise
until the U clamp holds the stem tight.
Tighten this well.
If not connected, attach the TWO colour-coded
cables to their matching colours, making sure
to align the arrows on each end.
Slot the handlebar (1) into the stem (7).
Loosely fit the bolts with your fingers to
ensure they are straight. A little wiggle of the
handlebar can help these to align. Tighten
evenly with the supplied Allen key.
17