HTW -TD-030KOID Manual De Usuario E Instalacion página 27

1. " " Key
Connect the power supply and the indicator light will be on for 2 seconds
to enter the standby state or the state before the last power failure. The
" " indicator in standby mode is on and off slowly, and other indicators
are off. Press this key once to start the machine and enter the working
state, " " indicator light is on, and other indicators indicate the actual
temperature and working state mode.
2. " " and " " Adjustment Keys
When the machine is turned on, press the " " or " " key to enter the
temperature setting state, and the set temperature parameters flash. At
this time, press this key once, the set temperature will increase/decrease
by 5 on the basis of the last set temperature, and cycle within 40-80°C.
During the setting process, the corresponding setting temperature indicator
flashes. When the temperature setting parameter does not change within
5 seconds, the parameter setting result will be automatically defaulted, and
the system will enter the corresponding working state.
3. " " WIFI Key
Press and hold the "
status, the buzzer beeps, and the WiFi indicator light flashes. At this time,
the distribution network can be carried out according to the APP prompt.
After the distribution network is successful, the WiFi indicator will always
be on.
If the network is not successfully distributed for more than 3 minutes, the
WiFi indicator will go out. At this time, press and hold the "
seconds againto restart the distribution network.
4. " " Smart Key
When the water heater is turned on, hold the "
to enter the "Smart" mode. The Smart key indicator light is on (if the
waterheater is in the process of learning and memory, the indicator light will
flash), and the "Smart" mode will analyze, process and memorize according
to the user's water habit in the previous week (if the water heater is powered
on for less than one week, it will learn and memorize for a full week first),
and then the water heater will heat up in advance according to the memory
water use time;
When the water heater is powered on, it begins to remember the user's water
habits. If it's enter the Smart mode, after the statistical data of the second week
takes effect, the water heater will prepare hot water in advance according to the
user's water use habits in memory.
Long press the "Smart" key for 3 seconds to exit the "Smart" mode, and the
"Smart" indicator light goes out.
" key for 3 seconds to enter the APP distribution
8
" key 3
" Smart key for 3 seconds