EXIT Toys Play goals Manual De Instrucciones página 7

Assembly and installation
It could be helpful to have an additional person assist in the assembly process.
• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs, and other
possible hazards.
• Lateral clearance is essential. Place the Soccer Goal away from walls, structures, fences, and
other play areas. Maintain a clear space on all sides of the soccer goal. A minimum of 3m
from frame edge is recommended.
• Be aware that soccer goals can be heavy:
o ask for assistance of a second person when setting up the goal is too heavy
o ask for assistance of a second person when lifting the soccer goal off the ground
• Never set-up the soccer goal in heavy rain, wind or storm conditions, especially storms. It is
recommended that the soccer goal be taken apart and stored.
• Place the soccer goal on a level surface before use.
• Secure the soccer goal against unauthorized and unsupervised use.
• Goal can only be anchored and used on soft surfaces.
Usage and maintenance
Inspect the soccer goal before each use and replace any worn, defective, or missing parts.
The following conditions could present potential hazards:
• Missing, improperly positioned, or insecurely attached frame padding, barrier or enclosure.
• Punctures, frays, tears, or holes worn in the soccer goal mesh.
• A bent or broken frame.
• Sharp protrusions on the frame or suspension.
• Loosened or missing hardware, system.
User Manual
MSP-010-V01
EN
7