Philips AVENT SCD503 Manual De Usuario página 11

13 Recycling
•
This symbol means that you must not
throw away the appliance with the
normal household waste. Dispose of the
appliance at an official collection point
for electrical appliances. Correct disposal
helps to preserve the environment.
14 Frequently asked
questions
Why don't the power-on light of the baby
unit and the 'link' light of the parent unit
come on when I press the on/off buttons
of the units?
• Perhaps one or both units are not
plugged in properly. Connect the units
to an electrical outlet and press the on/
off buttons on both units for 3 seconds to
establish connection between the parent
unit and the baby unit.
• If you use the parent unit on batteries,
the batteries of the parent unit are empty
or there are no batteries in the battery
compartment.
Why does the 'link' light on the parent
unit flash red continuously?
• The baby unit and the parent unit are out
of range of each other. Move the parent
unit closer to the baby unit.
• The baby unit may be turned off. Turn on
the baby unit.
Why does the parent unit beep?
• If the parent unit beeps while the 'link'
light flashes red continuously, the
connection with the baby unit is lost.
Move the parent unit closer to the baby
unit or turn on the baby unit if it was off.
The baby unit may be turned off. Turn on
the baby unit.
Why does the appliance produce a high-
pitched noise?
• The units may be too close to each other.
Make sure the parent unit and the baby
unit are at least 1 meter/3.5 feet away
from each other.
Why don't I hear a sound/Why can't I
hear my baby cry?
• The baby unit and the parent unit may be
out of range of each other. Reduce the
distance between the units.
• You may have set the volume to the
lowest level (mute). Increase the volume.
Why does the parent unit react too
quickly to other sounds?
• The baby unit also picks up other sounds
than those of your baby. Move the baby
unit closer to the baby (but observe the
minimum distance of 1 meter/3.5 feet).
11