Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10
TROUBLESHOOTING
Problem
The handle is not
in position.
The machine does
not start.
The machine cuts
grass unevenly.
The machine does
not mulch correct-
ly.
The machine is
hard to push.
There is a high vi-
bration in the ma-
chine.
Possible cause
Solution
The bolts are not
Adjust the height
engaged correctly.
of the handle and
make sure that the
bolts and nuts are
aligned correctly.
The battery ca-
Charge the battery
pacity is low.
pack.
The start handle is
Replace the start
defective.
handle.
The battery key is
Put in the battery
not put in.
key.
The lawn is rough. Examine the mow-
ing area.
The blade height is
Move the wheels
not set correctly.
to a higher posi-
tion.
Wet grass clip-
Wait until the
pings attach to the
grass dries before
deck.
mowing.
The mulch plug is
Install the mulch
missing.
plug.
The grass is too
Increase the blade
tall, or the blade
height.
height is too low.
The grass catcher
Empty the grass
and the blade
clippings from the
drags in thick
grass catcher.
grass.
The blade is un-
Replace the blade.
balanced and
worn.
The motor shaft is
1. Stop the mo-
bent.
tor.
2. Remove the
safety key and
battery pack.
3. Disconnect the
power source.
4. Inspect for
damage.
5. Repair the ma-
chine before
you start it
again.
English
Problem
The machine stops
during mowing.
* If you cannot find the solution to these problems, go to the
service center.
11
TECHNICAL DATA
Voltage
Motor
No load speed
Self-propelled speed
Deck size
Height adjustments
Front wheel
Rear wheel
Functions
Weight (without bat-
tery pack)
Battery model
Charger model
12
LIMITED WARRANTY
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
14
Possible cause
Solution
The blade height is
Increase the blade
too low.
height.
The battery pack is
Charge the battery
out of power.
pack.
The grass clip-
Remove the bat-
pings attach to the
tery pack and
deck or the blade.
check the deck.
Operation temper-
Cool the machine.
ature of the ma-
chine is too high.
80 V
Brushless
2800 RPM / 3200 RPM (Turbo)
1.9-4.9 fps (0.6-1.5 m/s)
21"
1-3/8 - 4" (3.5 - 10.2 cm)
8"
10"
4-in-1 (Mulch, Rear Bag, Side Dis-
charge, Turbo)
65 lbs (29.5 kg)
2901302/BAB703/
GBA80250/2902402/
BAB706/2902502 and other BAB
series
CAB801/2901402 /GCH8020 and
other CAB series
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Publicidad
