7. Operating rules
Transport
Do not lift the pump by the electric cable, use only the handle provided for the purpose. In case you have to
move it from one place to another, for safety reasons we suggest to stop the power supply.
Below zero temperatures
While working or submerged in the liquid, the pump does not freeze. Removing the pump from the water and
exposing it to below zero temperatures, the impeller may be blocked by the freeze.In case the impeller is blo-
cked by the ice, you have to submerge the pump in the water and let the ice melt before starting. Avoid quick
ways to defrost (for example to warm it) to avoid damages to the pump.
Cleaning
If the pump worked with liquid containing solid bodies, when it stops working, let it run a few minutes in clean
water. Remove the impurities (mud, stones, etc..) to avoid them drying, bloking impeller and mechanical seal,
stopping the pump from working.
Storage
In the case of pump storage:
• Store the pump in places protected from humidity and warm temperature.
• Place it in vertical position, paying attention to its stability just to avoid rollings and falls.
- 24