Publicidad
Idiomas disponibles
Idiomas disponibles
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from
the grill cart.
5. Use an adjustable wrench to remove the LP
regulator from the manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill
cart with the two screws that are preassembled on the
regulator.
GAS CONVERSIONS
Make Gas Connection
1.A combination of pipe fittings must be used to connect the
2. Connect the brass connector on one end of the 10 ft (3.0
3. Connect the quick connector on the other end of the
4.Please do leak test after conversion. See page 7.
grill to the existing gas line.
The 10 ft (3.0 m) PVC flexible gas supply hose design
certified by CSA must be used.
Pipe-joint compounds suitable for use with Natural gas
must be used. Do not use Teflon®+ tape.
There must be a certified manual shut-off valve in the gas
supply line near the grill for easy access.
m) PVC flexible gas supply hose to the Natural gas
pressure regulator.
10 ft (3.0 m) PVC flexible gas supply hose to the rigid
Natural gas supply pipe.
a.The outdoor cooking gas appliance and its
individual shutoff valve must be disconnected from
the gas supply piping system during any pressure
testing of that system at test pressure in excess of
0.5 psi(3.5KP)
b. The outdoor cooking gas appliance must be
Publicidad
