SNOWJOE SUNJOE 24V-CRLM15 Manual Del Operador página 11

Fig. 6
3. Fit the upper handle frame on both middle handle bars, as
shown, aligning the holes. Secure with the remaining two
sets of handle knob and bolt (Fig. 7).
Fig. 7
Middle handle
bars
Lower handle
frame
4. Secure the cable with the two cable clips, as shown
(Fig. 8)
Fig. 8
Cable clips
Middle
handle bars
Handle knob
+ bolt
Lower handle
frame
Upper handle
frame
Handle knob
+ bolt
Cable
Grass Collection Bag Assembly + Fitting
The grass collecting bag prevents grass clippings being
thrown across your lawn as you mow.
1. Fit the grass collection bag support rod into the tube of
the grass collection bag (Fig. 9)
Fig. 9
Grass collection
bag support rod
2. Clip the protective leather profiles onto the support rod to
secure the assembly (Fig. 10).
Fig. 10
Protective
leather profiles
3. Lift the ejector flap to the highest position, and assemble
the grass collection bag onto the mower by hooking the
sockets to both ends of the roller bar shaft (Fig. 11).
Fig. 11
Socket
11
Grass collection bag
Grass collection bag