Descargar Imprimir esta página

EAS ELECTRIC EMEI20L Manual De Instrucciones página 42

Ocultar thumbs Ver también para EMEI20L:

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation and connection
This appliance is only intended for domestic
1.
use.
This oven is intended for built-in use only.
2.
It is not intended for counter-top use or for
use inside a cupboard.
Please observe the special installation
3.
instructions.
The appliance can be installed in a
3.
60cm wide wall-mounted cupboard.
The appliance is fitted with a plug and
4.
must only be connected to a properly
installed earthed socket.
The mains voltage must correspond to
5.
the voltage specified on the rating plate.
The socket must be installed and
6.
connecting cable must only be replaced by
a qualified electrician. If the plug is no
longer to accessible following installation,
an all-pole disconnecting device must be
present on the installation side with a
contact gap of at least 3mm.
Adapters, multi-way strips and
7.
extension leads must not be used.
Overloading can result in a risk of fire.
The accessible
surface may be
hot during
operation.
42
V.4

Publicidad

loading