Metra 99-7356B Instrucciones De Instalación página 3

ISO DIN radio provision
1. Attach the factory panel clips to
the radio housing (Figure A)
2. Attach the factory hazard button to
the radio trim panel with (2) of the
#8 x 3/8" screws provided.
(Figure A)
3. Attach the pocket to the radio
brackets with (4) of the #8 x 3/8"
screws provided. (Figure B)
4. Slide the radio into the radio
brackets/pocket assembly and
secure with the screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.
Kit Assembly
(Figure A)
99-7356B
(Figure B)
3
(Figure C)