Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 6
2
3
15
#11 BOLT M6*15
Step 6:
Place the table top (#5) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the frame A (#2) and the frame B (#3) to the
underside of the table top (#5) rim by using bolts (#11).
Make sure that all of the bolts have been tightened
completely. See Figure 6.
Note:
1. Please do not get rid of the EPE paper before the
appliance is fully assembled.
2. The igniter valve should be facing towards the front
left side of the appliance.
FIGURE 8
Plastic
Screw
Step 8:
Turn the table to its upright position. Place the tank into
the tank support assembly (#6). See Figure 8.
Note:
Secure the tank in place by turning the plastic screw
clockwise as illustrated above.
V-3
5
EPE
Paper
6
DO NOT RETURN TO THE STORE!
STOP
FIGURE 7
Igniter
Valve
11
Step 7:
Turn the table to its upright position and discard
the EPE paper. See Figure 7.
FIGURE 9
4
Rotate
Clockwise
Step 9:
Attach the fuel supply hose of (#5) to the tank by
rotating the connector clockwise. See Figure 9.
PAGE 5 OF 9
Caution: The Tank
must face this way.
5
Publicidad
