Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 10
Fire Shield
As Illustrated:
Remove the glass from the three
holes on the fire shield as
illustrated. These holes must be
exposed completely to ensure that
there is adequate airflow after ignition.
Step 10:
Place the glass (#16) into the steel cover.
See Figure 10.
SPECIFIC WARNINGS:
1) Both children and adults should be aware of the hazards of high surface temperatures and should keep their
distance in order to avoid burns and ignition of clothing.
2) Children should be under adult supervision when in the vicinity of this appliance.
3) Clothing or any other flammable materials should not be hung from or near this appliance.
4) Any guard or protective device removed for servicing the appliance must be replaced prior to use.
5) Installation and repair should be done by a qualified person. The appliance should be inspected before use
and at least annually by a qualified service technician. Frequent cleaning may be required. It is imperative that
the control compartment, burners, and circulating air passageways of the appliance be kept clean at all times.
V-3
Note:
The glass cannot be
exposed over top of the
steel cover surface.
DO NOT RETURN TO THE STORE!
STOP
FIGURE 11
Step 11:
Place the cover (#8) onto the table top (#5) to cover
the glass set. See Figure 11.
Note:
1. In order to protect the burner system, when the fire
is not in use and on rainy days, the cover should be
used.
2. To repair any scratches on the table top, use the
touch-up paint for table top (#17) provided.
PAGE 6 OF 9
Publicidad
