Publicidad
Idiomas disponibles
Idiomas disponibles
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will do
the job better and more safely at the rate that it
was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source be-
fore making any adjustments, changing acces-
sories or storing the tool. This preventive safety
measures reduce the risk of accidental starting
of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in work pieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE: Tool service must be performed only
by qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
SPECIFIC SAFETY RULES FOR
ANGLE GRINDERS
Do not use this generator in unventilated or
interior areas. The gases emitted by the exhaust
are highly dangerous, the concentrated carbon
E S P A Ñ O L •
monoxide can cause dizziness or even death.
This generator must be positioned firmly on the
ground.
The electrical output must not exceed the
maximum capacity specified on the data label.
Exceeding the load capacity could damage the
unit and shorten its life of use, this would invali-
date the warranty.
Everything that requires connecting to the gen-
erator must be in optimal conditions.
Keep the area around the generator clean and
clear. Never place the generator against a build-
ing, near plastic structures, tents, etc.
Always use the correct mixture of gasoline and
oil indicated in this manual or on the product
labels.
Prevent fires, stop the engine when refueling,
never overpass the capacity of the tank.
Always clean any spill on the generator with
sand.
Do not use the generator in or near explosive
atmospheres.
Prevent electric shocks, do not operate the ma-
chine in the rain, snow or touch it directly with
your hands.
Periodically check for spills in the fuel system.
Seals and hoses should also be checked for signs
of deterioration. Check for loose or damaged
clamps. All defects found must be corrected
before further use.
Always allow the generator to reach its maxi-
mum operating load before connecting any
electrical appliance.
Always unplug any appliance from the genera-
tor before shutting it down.
Before transporting the generator and loading
it into a vehicle, empty the fuel tank and pre-
vent it from spilling.
Prevent a fire and electric shock, never connect
an electrical charge with the electrical outlet
turned on.
Do not connect the generator to any other
power source.
Store the generator in a well-ventilated area
with an empty tank.
GASOLINE
WARNING: Place the generator firmly on the
ground when refueling, move at least 3 meters
from the place where it was supplied to start the
engine. After refueling be sure to tighten the
fuel tank cap and clean up any spills.
IMPORTANT: Allow the engine to cool be-
fore opening the gas tank. Vapors are extremely
flammable and can ignite when in contact with
hot surfaces or flames.
M anual de us uar io
9
Publicidad
