Tool Description; Technical Specifi Cation; Symbols; Intended Use - Festool DOMINO DF 500 Manual De Instrucciones

8
Health hazard by dust
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies, depend-
ing on how often you do this type of work.
To reduce your exposure to these chem-
icals: work in a well ventilated area, and
work with approved safety equipment,
such as dust masks that are specially
designed to fi lter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY,
USER MUST READ AND UNDERSTAND INSTRUC-
TION MANUAL.

Tool description

Technical specifi cation
Power
Speed (no load)
Mortising depth, max.
Mortising width, max.
Mortising bit range
Connecting thread of drive shaft
Weight (excluding cable)
Degree of protection
All metric dimensions are binding. Mortising
bit dimensions are critical for safe operation,
and are presented in metric units only.

Symbols

V Volts
A Amperes
Hz Hertz
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions or reciprocation per minute
Ø Diameter
420 W
25,500 rpm
28 mm (1.1")
23 mm (0.9") +
bit diameter
4/5/6/8/10 mm
M6 x 0.75
3.2 kg (7 lbs)
/ II
Note, Danger!
Wear ear protection!
Manual, read the instructions.

Intended use

The Domino tenon jointer is designed to pro-
duce mortises in soft and hard wood, chip
board, plywood and fi ber boards. All applica-
tions beyond this are regarded as improper
use. The tool should not be altered or used
for any other purpose other than as specifi ed
in these operating instructions. Using the tool
in contravention to this manual will void your
warranty and may lead to injury.
The user shall be responsible
and liable for damages and accidents resulting
from misuse or abuse of this tool.

Functional description

The pictures for the functional description
are on a fold-out page at the beginning of
the instruction manual. When reading of the
manual you can fold out this page for having
always an overview of the machine.
[1.1] Auxiliary handle
[1.2] Mortise width dial
[1.3] Fence high locking lever
[1.4] Power switch
[1.5] Main handle (barrel grip)
[1.6] Plug it power inlet
[1.7] Depth adjust lever
[1.8] Depth adjust lock
[1.9] Board thickness gauge
[1.10] Fence angle locking lever
[1.11] Fence angle gauge
[2.1] Motor housing
[2.2] Fence body
[2.3] Spindle lock
[2.4] Fence body release lever
[2.5] Horizontal position gauge
[2.6] Friction pads (qty. 2)
[2.7] Mortising bit throat opening
[2.8] Stop latch (qty. 2)
[2.9] Outrigger mounting slot
[2.10] Baseplate
[2.11] Dust collection port