Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL PANEL
A
B C
BUTTONS
A TIMER BUTTON
Program a time from (1-hour to 24-hours) for the air
programmed, the Timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number of
hours you want the air conditioner to continue to operate
NOTE:
to be saved.
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number
turning On.
NOTE: Wait approximately 5 seconds for the Turn-On time
to be saved.
To cancel the timer:
•
press the timer button again and the timer will be canceled.
B FAN SPEED BUTTON
when the air conditioner is either in Cool or Fan mode.
NOTE:
DRY mode.
• Press the Fan Speed button to toggle among the two
speeds. The corresponding fan speed indicator will
illuminate.
C REMOTE CONTROL SIGNAL RECEIVING WINDOW
Aim the Remote Control at this window so the Control will
receive the signal.
D
CONTROL PANEL DISPLAY
Displays the Set Temperature in degrees Fahrenheit or
degrees Celsius, or the hours remaining in a Time Delay. The
corresponding indicator light will illuminate.
UP AND DOWN ARROW BUTTONS
E
To Set the Temperature:
The temperature can be set between 62ºF and 86º F (17ºC
and 30º C) when the air conditioner is in Cool mode.
1. Press the Mode button until the Cool mode is selected.
2. Press the Up Arrow or Down Arrow buttons to
select the Temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
D
E
F
J
8
G
F MODE BUTTON
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dehum – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
G
POWER BUTTON
Turns ON/OFF power to the air conditioner.
NOTE: Turning o power by pressing the Power button does
NOT disconnect the appliance from the power supply.
•Press the Power button. The Power indicator will illuminate.
REMOTE CONTROL
1. Insert the two batteries (provided).
2. Aim the remote control at the signal receiver on the
control panel to operate the air conditioner.
H SLEEP BUTTON
Increases the set temperature by 2ºF (1ºC) after 2-hours, and
then increases the temperature by an additional 2ºF (1ºC)
after another 2-hours.
NOTE: The fan will operate at Low speed and cannot be ad-
Press the Sleep button to enter Sleep mode. The Sleep indica-
tor will illuminate.
To Cancel Sleep Mode:
• Press the Sleep button or the Mode button (Cool, Fan or
Dry) on the remote control.
I ºC/ºF BUTTON
•Press the ºC/ºF button to toggle between displaying the
temperature in degrees Fahrenheit or degrees Celsius. The
corresponding indicator will illuminate.
INDICATOR LIGHTS
Illuminate to indicate the selected mode, speed or condition.
J WATER FULL
The Water Full indicator illuminates, when the internal water
turn o automatically. To drain the water tank, see "Air Condi-
tioner Care" for instructions.
High
Cool
H
Low
Dehum
TEMP
I
Sleep
Fan
C / F
TIMER
POWER
Publicidad
