Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNICAL DATA
Description
Value
of the parameter
of the parameter
RATCHET AXLE STAND
Name of the product
( 2 PIECES )
Model
MSW-RASE3/2-01
Dimensions [mm]
200x180x300
Maximum load (1 piece) [t]
3
Weight (1 piece) [kg]
6,8
Height adjustment range
290-430
[mm]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
EXPLANATION OF SYMBOLS
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective gloves.
Wear a helmet and a face protection.
Wear foot protection.
ATTENTION! Hand crush hazard!
Wear special footwear.
CAUTION! Hanging load!
Wear protective goggles.
6
U S E R M A N U A L
CAUTION! The figures in this manual are illustrative
only and may vary in some details from the actual
appearance of the product.
2. USAGE SAFETY
ATTENTION!
Read
all
safety
warnings
instructions. Failure to follow warnings and
instructions could result in serious injury or even
death.
The term "device" or "product" in the warnings and
instructions refers to the Ratchet axle stand.
2.1. SAFETY IN THE WORK AREA
a)
Keep the work area tidy and well lit. Disorder or poor
lighting can lead to accidents. Be careful, watch what
you are doing and use common sense when working
with the device.
b)
If in doubt as to whether the device is working
properly, contact the manufacturer's service.
c)
Repairs to the device may only be carried out by
the manufacturer's service. Do not carry out repairs
yourself!
and
d)
No children or unauthorised persons are allowed in
the work area. (Lack of attention may result in loss of
control over the device).
e)
Check the condition of the safety stickers regularly.
Replace them if they are illegible.
f)
Keep these instructions for future reference. If
the device is to be passed on to third parties, the
instructions for use must be handed over together
with the device.
g)
Keep packaging parts and small assembly parts out of
the reach of children.
h)
Keep the device away from children and animals
i)
When using this device together with other devices,
the other instructions for use must also be followed.
REMEMBER! When using the device, protect
children and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not operate the device if you are tired, ill or under
the influence of alcohol, drugs or medication which
might impair your ability to operate the device.
b)
The device may only be operated by persons who are
physically fit, capable of handling the device and who
have been adequately trained, who have read these
instructions and have received training in health and
safety.
c)
The device is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have been given
instructions by them on how to operate the device.
d)
Be careful and use common sense when operating
the device. A short moment of distraction during
operation may lead to serious personal injury.
e)
Use the required personal protective equipment
when working with the device specified in section 1
of the explanation of symbols. The use of appropriate,
approved personal protective equipment reduces the
risk of injury.
f)
Do not overestimate your capabilities. Maintain body
balance at all times during operation. This allows for
better control of the device in unexpected situations.
Rev. 18.10.2022
g)
Do not wear loose clothing or jewellery. Keep hair,
clothing and gloves away from moving parts. Loose
clothing, jewellery or long hair can be caught by
moving parts.
h)
The device is not a toy. Children should be supervised
and
to ensure that they do not play with the device.
i)
Do not place your hands between the supports and
the load!
j)
Wear gloves when working with the supports to
prevent hands from slipping.
2.3. SAFE USE OF THE DEVICE
a)
Do not overload the device. Use tools that are suitable
for the given application. A correctly selected device
ensures better and safer performance of work.
b)
Keep unused devices out of the reach of children
and anyone not familiar with the device or these
instructions. Devices are dangerous in the hands of
inexperienced users.
c)
Keep the device in good working order. Before each
use, check for general damage or damage to moving
parts (cracks in parts and components or any other
condition that may affect the safe operation of the
device). If damaged, have the device repaired before
use.
d)
Keep the device out of the reach of children.
e)
Repair and maintenance of the device should be
carried out by qualified persons using only original
spare parts. This will ensure a safe use of the device.
f)
To ensure the designed operational integrity of the
device, do not remove factory-installed covers or
loosen any screws.
g)
When transporting and moving the device from the
place of storage to the place of use, follow the health
and safety regulations for manual transport that apply
in the country in which the device is used.
h)
It is forbidden to move, shift or rotate the device
during operation.
i)
Clean the device regularly to prevent the permanent
accumulation of dirt.
j)
Do not work with two objects at the same time.
k)
The device is not a toy. Cleaning and maintenance
must not be performed by children without adult
supervision.
l)
It is forbidden to tamper with the device in order to
change its parameters or construction.
m)
Keep the device away from sources of fire and heat.
n)
Do not overload the device.
o)
Do not use the supports to lift the vehicle.
p)
Before lifting the vehicle, immobilise it - switch
on the auxiliary (parking) brake, leave the manual
transmission in 1st gear or reverse (in automatic
transmission in the parking position "P") and put
special wedges under those wheels that will remain
on the ground after lifting.
q)
The supports shall be positioned in accordance
with the support points indicated by the vehicle
manufacturer.
r)
Garage supports should not be used individually.
s)
Under no circumstances should you lie down under
the vehicle.
t)
Observe supports which carry weight, especially
during lifting.
Rev. 18.10.2022
EN
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
Supports are used for supporting vehicles. They are not
designed for independent lifting of vehicles.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DESCRIPTION
4
3
2
1
1.
base
2.
lever
3.
column
4.
pin
3.2. Preparation for work
LOCATION OF THE DEVICE
Always operate the device on a level, stable, clean,
fireproof and dry surface and out of the reach of children
and persons with reduced mental, sensory and intellectual
abilities.
ASSEMBLY OF THE DEVICE
Attach the lever and the column to the base with the pin.
The components must not be either too loose or too tight.
3.3. WORKING WITH THE DEVICE
1.
Place the supports under the vehicle according to the
support points specified by the car manufacturer.
2.
Adjustment: raise the lever and the column
simultaneously until it is at the desired height. Lower
the lever to lock the pawl and the column. MAKE
SURE THE PAWL IS FULLY LOCKED AND THE COLUMN
DOES NOT MOVE.
3.
Carefully lower the load onto the supports.
3.4. CLEANING AND MAINTENANCE
a)
Use only non-corrosive agents for cleaning the surface.
b)
After each cleaning, all components should be well
dried before the device s used again.
c)
Regularly inspect the device for technical failure and
damage.
d)
Use a soft, damp cloth for cleaning.
e)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or metal scraper) as these may
damage the surface of the device.
7
Publicidad
