Publicidad
ASSEMBLY INSTRUCTIONS
Phillips Head Screwdriver, Mallet or Padded Hammer and Tape Measure.
We recommend finishing the unit before final assembly. Before finishing, read the
Note: Due to the fact that more than one type of hardwood is used,
a) Veneer parts – apply stain to unexposed portion of side panel. See FIGURE 2.
b) Alder pieces – apply stain to back of base. See FIGURE 2.
FIG. 1
1. Lay out the wood parts in their approximate locations to aid in the identification and assembly.
223W / 224W
TOOLS REQUIRED:
IMPORTANT:
enclosed Finishing Hints sheet.
we recommend testing for desired color.
To test for desired color on:
224W Standard
Console Base shown
in all drawings.
223W/224W — Page 3
Publicidad
