Publicidad
M
x 8
N
O
x 2
FIG. 6
6. Measure up 1/4" from the bottom of the Base (E) and mark for positioning of the Corner Brace (L).
Attach a Corner Brace to the Base and each Side with Screws (M). Insert Adjustable Glides (N)
into the Corner Braces.
Hammer Tack Glide (O) into bottom edge of the Sides about one inch from the back.
P
x 4
Q
x 4
FIG. 7A
7. Stand the unit upright. Determine where you want to locate the Adjustable Shelf (G). Tap the Shelf
Brackets (P) into the holes with the flat side down. See FIGURE 7A. Insert the shelf as shown.
Secure the shelf to the unit using Screws (Q) through the holes in the bottom of the Shelf Bracket
into the Shelf.
8. Rotate the Adjustable Glides in the Corner Braces until the unit stands level.
Note: If doors are added to unit and the unit is moved, the doors may come out of alignment. To
correct, readjust the front levelers first before adjusting door hinges.
9. When you have determined the location for your unit, install the Furniture Tipping Restraint (R).
Carefully follow the instructions contained on the package.
Page 6 — 223W/224
x 2
L
M
¼"
M
M
FIG. 7B
N
Publicidad
