Publicidad
Idiomas disponibles
Idiomas disponibles
Improper use of the equipment can cause very serious injuries. It is mandatory to read and understand the fo-
llowing instructions well before using it:
- The work areas will always be well lit and free of obstacles.
- Equipment will be used only if it is in perfect condition.
- The equipment will not be used in dangerous, humid or wet environments.
- The equipment will be used in perfectly ventilated areas.
- Face or dust masks will be used during equipment operation.
- Protective gloves will be used during the operation of the equipment.
- The team will stop in any situation of risk or danger.
- It is forbidden to neutralize the safety and protection devices of the equipment.
- It is forbidden to handle the equipment with loose clothing, loose hair, bracelets or pendants.
- It is forbidden to manipulate the equipment under the influence of alcohol or drugs.
- Protective gloves will be used in all equipment maintenance tasks.
- Maintenance tasks will always be carried out with the equipment turned off and disconnected from the elec-
trical current.
The machine's control panel is located in a risk-free area, within the user's reach, with logical, easy-to-understand
signage and consistent maneuvers for each associated action. Users need to be aware of the computer's applica-
tions, their limitations, and all possible risks or dangers.
5.3. Who can use the equipment
Only authorized personnel who have read and understood this instruction manual, which has been written clearly
and simply, may work with the equipment. You must always accompany the team for any necessary consultation.
5.4. Equipment repair
Only personnel authorized or designated by Master Products may repair and install new parts on the equipment. If
it is still in the warranty period, only personnel authorized or designated by Master Products may carry out actions
on it without losing the warranty.
5.5. How to stop the equipment
The equipment stops under any circumstances as long as the emergency stop or the red OFF switch on the control
panel is pressed. Before carrying out any maintenance task on the equipment, it must be stopped and disconnec-
ted from the electrical current. The equipment must be stopped and disconnected immediately from the electrical
current in case of noticing abnormal operation.
6. Disclaimers
Modifications to Master Products machines without the direct approval of the manufacturer are prohibited. The latter
declines any responsibility, annulling the warranty rights of the machines to which modifications have been made, not
taking responsibility for failures and accidents that may be a consequence.
During the warranty period, Master Products machines may only be disassembled and repaired by personnel autho-
rized or designated by the manufacturer.
MASTER PRODUCTS is characterized by the continuous improvement of all its equipment. This user manual will con-
tinue to be valid to understand the operation and perform safe maintenance on the purchased equipment, even if
the model is updated with new versions. If the operating characteristics of the purchased product differ from the one
mentioned in this manual, it is necessary to contact MASTER PRODUCTS technical support or any of its authorized
distributors to obtain assistance and resolve any questions.
This manual, as well as any documentation supplied by the manufacturer, should be considered as the information
package associated with this equipment. Any user must read and understand this manual before using the equipment.
24
www.masterproducts.es
Publicidad
