us_main.book.book Page 24 Tuesday, May 25, 2021 11:06 AM
24 MAINTENANCE
MAINTENANCE
WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read this entire owner's manual, including
the SAFETY INSTRUCTIONS, before operating this appliance.
• Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
• Do not use volatile substances (benzene, paint thinner, alcohol, acetone, etc.), abrasive cleaners, or
detergents with strong chemical components when cleaning the appliance. Doing so may cause
discoloration or damage to the appliance, or may cause a fire.
• Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel - Do not contact the following parts while the appliance is energized: pump,
motor, noise filter cover, and heater (on applicable models).
Regular Cleaning
Care after Wash
After the cycle is finished, wipe the lid and the
inside of the lid seal to remove any moisture.
• Wipe the body of the washer with a dry cloth to
remove any moisture.
• Leave the lid open to dry the tub interior.
NOTE
• Make sure children and pets do not climb into
the tub. Engage the Control Lock feature if
needed to prevent children from accidentally
starting a wash cycle.
Cleaning the Exterior
Proper care of your washer can extend its life.
Lid:
• Wash with a damp cloth on the outside and
inside and then dry with a soft cloth.
Exterior:
• Immediately wipe off any spills.
• Wipe with a damp cloth.
• Do not touch the surface or the display with
sharp objects.
Periodic Maintenance
• Use a towel or soft cloth to wipe around the
washer lid opening and lid glass.
• Always remove items from the washer as soon
as the cycle is complete. Leaving damp items in
the washer can cause wrinkling, color transfer,
and odor.
• Run the Tub Clean cycle once a month, or more
often if needed, to remove detergent buildup
and other residue.
Cleaning the Tub
Over time, residue may build up in the tub, leading
to mildew or a musty odor. Run the Tub Clean
cycle monthly to remove residue and prevent
odor.
NOTE
• Make sure to run the Tub Clean cycle only when
the tub is empty. Never load laundry while using
this cycle. The laundry may be damaged or
contaminated with cleaning products.
• Run the cycle more often under heavy use
conditions or if odor is already present.
• If mildew or musty smell already exists, run this
cycle once a week for three consecutive weeks.
1
Remove any clothing from the tub.
2
Adding cleaning agents.
Cleaner
Tub cleaner
Follow manufacturer's
recommendations.
Lime scale
remover
Liquid chlorine
Add to main wash liquid
bleach
detergent dispenser.
Instructions