Publicidad
Idiomas disponibles
Idiomas disponibles
Important Warnings
• Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
• Do not attempt to modify the PDU, including the input plugs and power cables.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Never attempt to install electrical equipment during a thunderstorm.
• Install in accordance with National Electrical Codes. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug rating/equipment
rating as follows:
Model
PDUV30HV
PDUV20HVL6-72
PDUMV30, PDUMV30-ISO
PDUMV16HV, PDUMV20HV,
PDUMV20HVL6, PDUMV20HV-36
PDUMV30HV
Installation
Note: Regardless of configuration, the user must determine the
fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure
types and may not be appropriate for all applications.
1A
Zero U Rack Configuration (Mounting Brackets).
Prior to installation, determine the rack location in which
the PDU is to be installed. Attach the mounting brackets
to the back of the PDU as shown, using the included
screws. To assist with proper positioning, the brackets
have four screw holes each; make sure that the same
two holes are used to attach each bracket to the PDU.
After attaching the brackets, position the PDU in the
rack and mount it by installing four user-supplied
fasteners through the brackets into the rack.
1B
Zero U Rack Configuration (Mounting Buttons).
Attach the included mounting buttons to the PDU.
Position the PDU as desired in the rack enclosure, align
the buttons with the rack mounting slots, and slide the
PDU into position.
1C
Under-Counter Configuration. The PDU may be
installed under a counter using the included mounting
brackets. Attach the mounting brackets to the back of
the PDU as shown in STEP 1A. Secure the PDU to the
underside of the counter by installing two user-supplied
screws through each bracket into the counter.
Note: Your model may differ.
Series Number
Overcurrent Protection
AGIB6672
30A
AGIB6672
20A
AGPD6673
30A
AGPD6674
20A
AGPD6675
30A
1A
1B
1C
3
Publicidad
