Publicidad
Idiomas disponibles
Idiomas disponibles
charge the battery
New batteries are not fully charged. Before you can
use your phone, you need to install and charge the
battery. Some batteries perform best after several full
charge/discharge cycles.
To charge using the charger:
1
Insert the charger
into the micro USB
port on your phone
as shown.
2
Plug the other end
of the charger into the appropriate electrical
outlet.
3
When your phone displays Charge Complete, remove
the charger.
When you charge the battery, the battery level
indicator at the upper right of the screen shows
charging progress. At least one segment of the
indicator must be visible to ensure full phone
functionality while charging.
To charge from your computer:
You can also charge your phone's battery by
connecting a cable from your phone's micro USB port
to a high-power USB connector on a computer (not a
low-power one, such as the USB connector on your
keyboard or bus-powered USB hub). Typically, USB
high-power connectors are located directly on your
computer.
Both your phone and your computer must be turned
on, and you must have correct software drivers
installed on your computer. Cables and software
drivers are available in Motorola Original
sold separately.
Notes for charging your phone's battery:
• When charging your battery, keep it near room
temperature. Never expose batteries to
data kits,
TM
essentials
15
Publicidad
