RIDGID OF45175A Manual Del Operador página 15

Tank
DANGER:
!
Never attempt to repair or modi-
fy a tank! Welding, drilling or
any other modification will
weaken the tank resulting in
damage from rupture or explo-
sion. Always replace worn,
cracked or damaged tanks.
Filter Removal, Inspection and Replacement
To change a filter, pull off the filter housing
cover. If filter element is dirty, replace ele-
ment or entire filter.
Lubrication
This is an oilless type compressor requir-
ing no lubrication.
Storage
1. When not in use, compressor should be
stored in a cool dry place.
2. Tank should be drained of moisture.
Maintenance Schedule
Operation
Drain Tank
Check Air Filter
Check Safety Valve
Blow Dirt From Inside Motor
NOTICE:
Drain liquid from tank daily.
The tank should be carefully inspected at
a minimum of once a year. Look for
cracks forming near the welds. If a crack
is detected, remove pressure from tank
immediately and replace.
3. Hose should be disconnected and hung
open ends down to allow any moisture
to drain.
Daily
G
15
Weekly
G
G
G