Publicidad
Idiomas disponibles
Idiomas disponibles
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician shall install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc. The device shall only
be used indoors with an alternating current of 230 VAC, 50 Hz.
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
The TRIMO 310 is a compact 3-head moving effect featuring 3x10W high power white LEDs. It has been
designed to provide every lighting show with a new generation of effects. With the crossed moving beam
heads it's an ideal tool for clubs, small shows and parties.
clear display for easy menu setting
DMX control via 9 or 21 channels for simple or advanced controlling
9-channel mode: pan, pan fine, tilt, tilt fine, pan/tilt speed, on/off, shutter, auto programme 1
o
and auto programme 2
21-channel mode: pan, pan fine, tilt, tilt fine, pan/tilt speed, on/off, shutter (x 3 for each head)
o
master/slave mode for synchronized operation of multiple units linked in a chain
sound activation via internal microphone with adjustable sensitivity
built-in programs with speed adjustment
5.
Overview
Refer to the illustrations on page 2 of this manual.
1a
DMX input
1b
DMX output
2a
powerCon input
2b
powerCon output
6.
Installation
Choose a suitable mounting spot. Connect the power cord to the mains and switch on [6]. Switch off and
disconnect after use.
Mounting the Device
Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
norms.
V. 01 – 17/11/2014
VDPL310MB
3
LCD display
4
control panel
5
fuse holder
5
©Velleman nv
Publicidad
