Publicidad
Idiomas disponibles
Idiomas disponibles
7.5
DMX Mode
This mode allows you to control the device by any universal DMX controller.
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen" to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
DMX Starting Address
9 channels
21 channels
To set the device to work with a DMX controller
1.
Press MENU to open the menu.
2.
Select <Addr>.
3.
Set the DMX starting address.
DMX Channel Values
9-channel mode:
channel
pan
1
pan fine
2
3
tilt
4
tilt fine
pan/tilt fine
5
on-off
6
strobe
7
auto programme 1
8
auto programme 2
9
21-channel mode:
channel
head 1 pan
1
head 1 pan fine
2
head 1 tilt
3
head 1 tilt fine
4
head 1 pan/tilt speed
5
head 1 on-off
6
head 1 strobe
7
head 2 pan
8
head 2 pan fine
9
head 2 tilt
10
head 2 tilt fine
11
head 2 pan/tilt speed
12
head 2 on-off
13
head 2 strobe
14
15
head 3 pan
16
head 3 pan fine
head 3 tilt
17
head 3 tilt fine
18
V. 01 – 17/11/2014
first device
second device
1
10 (1 + 9)
1
22 (1 + 21)
VDPL310MB
third device
19 (10 + 9)
43 (22 + 21)
function
function
8
...
...
...
from
to
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
from
to
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
000
255
©Velleman nv
Publicidad
