Lamborghini Caloreclima EM 16-E Manual Para La Instalacion Y El Mantenimento página 28

• The length of the cables used must enable the burner to be opened, as well as the boiler
door.
• After removing the packaging materials, check the content integrity and make sure that no
damages have occured during transportation. In case of doubt, do not use the burner and
contact the supplier.
• The packaging material (wooden cages, cartons, plastic bags, foam, clips, etc...) are po-
tential sources of pollution and danger, if left lying around; they should be collected up and
disposed of in the correct way (in a suitable place).
DESCRIPTION
These are forced-draught burners, with gas/air mix at the combustion head, in a single igni-
tion stage. The burners are completely automatic and equipped with controls assuring maxi-
mum safety. They can be combined with any type of chamber whether in negative or positive
pressure, within the foreseen working range.
The burners are supplied without a gas train and must therefore be completed with the train
most suitable for the system in which the burner is to be fitted. The gas train is therefore
chosen by consulting the diagram; this illustrates pressure loss as a function of mains gas
pressure, required gas delivery at the appliance and the back-pressure in the combustion
chamber.
All the components can be easily inspected without having to disconnect from the main gas
supply. The burners are equipped with a cover which means they are particularly compact,
soundproof and safeguarded.
UK
28
M U