Lamborghini Caloreclima EM 16-E Manual Para La Instalacion Y El Mantenimento página 38

GAS CONNECTION
The system must be equipped with all the accessories required by current regulations. We
recommend the following: always include a filter, do not apply mechanical strain to the com-
ponents and, therefore install a flexible joint as well as a pressure stabilizer and an intercep-
tion cock at the heating system inlet. The pipes must be laid using rigid pipes. Any flexible
pipes must be type approved.
Also bear in mind the necessary space required for carrying out maintenance operations on
the burner and the boiler. After fitting the valve unit on the burner, check that there are no gas
leaks during the first ignition stage.
ADJUSTMENTS
COMBUSTION HEAD ADJUSTMENT
EM 16-E - EM 16/L-E
Adjust the combustion head by acting on the screw A accor-
ding to the indications shown on the index.
COMBUSTION HEAD ADJUSTMENT EM 26-E
- Loosen the knobs B.
- Acting on these modifies the position of the draught
tube with respect to the combustion head. Lining knobs
up with values 1, 2 or 3 gives minimum, medium and
maximum burner delivery respectively.
- Once adjustment has been completed tighten the
knobs B.
COMBUSTION AIR ADJUSTMENT
Adjustment of combustion air is effected from the out-
side of the cover. After loosening screw C act on air
adjustment screw D refer to the label. Once adjustment
has been completed tighten screw C.
UK
38
M
M
Reference index