Publicidad
Idiomas disponibles
Idiomas disponibles
A safety rope which already hold the strain of a crash or which is defective must not be used again.
Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.
Connect the fixture to the mains with the power-plug.
The occupation of the connection-cables is as follows:
Cable
Pin
Brown
Live
Blue
Neutral
Yellow/Green
Earth
The earth has to be connected!
Lighting effects must not be connected to dimming-packs.
Before taking into operation for the first time, the installation has to be approved by an expert!
DMX-512 connection / connection between fixtures
Projector 3
Starting address 9
120 Ohms
The wires must not come into contact with each other, otherwise
Please note, the starting address depends upon which controller is being used.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
International
L
N
DANGER TO LIFE!
Projector 2
Starting address 5
the fixtures will not work at all, or will not work properly.
Starting address 1
32/83
Projector 1
DMX-512 Controller
51840975_V_1_3.DOC
Publicidad
