Futurelight PCC-250 Manual Del Usuario página 29

DESCRIPTION OF THE DEVICE
Features
Multi-function colour-changer
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• Colour-wheel with additional 4 discrete dichroic filters plus open, 3200 K and 5600 K correction-filters, UV-
filter
• Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)
• Rainbow-effect with adjustable speed in both directions
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
• Strobe-effect of 1-13 flash per sec.
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Program,
Reset, lamp on/off
• Remotely switching of the lamp
• Built-in demo sequence
• Remote reset function
• Motorized zoom
• For MSD/HSD 250 or MSD 250/2 lamp
• DMX-control via every standard DMX-controller
• Suitable FUTURELIGHT controllers: EX-6 controller, CP-256/32 Controller
Overview
(1) Fresnell-lens
(2) Housing cover
(3) Housing screws
(4) Control Board
(5) Mounting bracket
(6) Fixation screw
1 2 3 4 5 6
29/89 51840900_V_1_2.DOC